Cleaning The Display - Planar HB Series User Manual

5. Cleaning the Display

If dust collects on the power plug, remove the plug from the outlet and clean off the dust. Dust
build-up may cause a fire.
Remove the power plug before cleaning. Failure to do so may result in electrical shock or
damage.
Keep the following points in mind when cleaning the surface of the display:

When the surface of the display becomes dirty, wipe the surface lightly with a soft clean
cloth.

If the surface requires additional cleaning, use LCD screen cleaner or LCD wipes, which
are available at most electronics stores.

Do not let cleaner seep into the display, as it may cause electrical shock or damage.

Refer to the Planar Display Cleaning Guidelines for more information.
Planar HB Series Huddle Board User Manual
020-1392-00A
Introduction
Page | 12