C - Starting Up; Installing The Reel Holder - Lincoln Electric DIX WD 300 Safety Instruction For Use And Maintenance

C - STARTING UP

1 - INSTALLING THE REEL HOLDER

The DIX WD 300 and reel holder are assembled with the help of the DIX WDV 100 connecting kit
Connecting kit
Installing the reel
Adjusting the reel brake
The reel core has a braking screw, which must be adjusted so that the reel of wire stops moving when it is stopped.
Protect the brake from
impurities!
Applying the brake excessively will stop continuous feeding (movement in jolts), with a risk of overloading the drive
motor.
If the braking force is not sufficient, the stopped wire reel could continue to turn due to inertia and the wire may get
entangled or come off.
TOPTIG
Drive pin
When you put in place the wire reel, make sure that the
reel drive hole rests on the core drive pin.
Female 5-mm hex key.
8695 5601 / D
Use a female 5-mm hex
key.
Released
Applied
C-3