Bosch Professional GWX 18V-15 C Original Instructions Manual page 28

28 | English
GWX 18V-15 SC
Number of speed settings
2
3
4
5
6
You can use the button for speed preselection (26) to preselect the required speed, even during operation. The information in
the table below describes the recommended values for the default settings with 3 preset speed levels.
Material Application
Metal Brushing, removing rust
Stainless steel Grinding
Metal Rough grinding
Metal Cutting
Stone Cutting
The values specified for speed levels are guide values.
The rated speed of the accessory must be at least
u
equal to the maximum speed marked on the power
Status indications
Battery charge indicator Meaning/cause
(user interface) (24)
Green Battery charged
Yellow Battery almost empty
Red Battery empty
Temperature indicator (30) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Power tool status indic- Meaning/cause
ator (29)
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty
Illuminated red Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
Flashing red Kickback shutdown, restart protection or im-
pact shutdown has been triggered
1 609 92A 4ZT | (13.08.2019)
Basic speed setting at level
1 2 3
-1 -1
[min ] [min ] [min
3400 max. –
3400 6600 max.
3400 5600 7600
3400 5000 6600
3400 4800 6000
Application tool Speed preselection
level
Cup brush 1
Fibre disc 2
Grinding disc 3
Grinding disc 3
Diamond cutting disc and 3
cutting guide (cutting of
stone is permitted only
with a cutting guide)
tool. Accessories running faster than their rated speed
can break and fly apart.
4 5
-1 -1 -1
] [min ] [min ]
– –
– –
max. –
8200 max.
7200 8600
GWX 18V-15 SC
-1
[min ]
3400
6600
max.
max.
max.
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
or charge the battery
Turn the power tool off and on again
6
-1
[min ]
–
–
–
–
max.
Bosch Power Tools