Auto-Detect Hard Disks
This option lets the system detect your hard disk(s) automatically for your
convenience.
Boot Sector Virus Protection
The available settings for this option are 'Enable' and 'Disable'.
Default Settings
Every option in AMIBIOS Setup contains two default values: a Fail-Safe
default and the Optimal default value. You can also choose to restore the
original BIOS settings (i.e. those that your board came with) at any time.
These options can be found in the 'Exit' menu.
Optimal Defaults
The Optimal default values provide optimum performance settings for all
devices and system features.
Fail-Safe Defaults
The Fail-Safe default settings consist of the safest set of parameters. Use them
if the system is behaving erratically. They should always work but do not
provide optimal system performance characteristics.
(c)1998 American Megatrends, Inc. All Rights Reserved
Exit Saving Changes [ Enter ]
Exit Discarding Changes [ Enter ]
Load Optimal Settings [ Enter ]
Load Fail Safe Settings [ Enter ]
Load Original Values [ Enter ]
ESC:Exit Enter:Select F5:Setup Defaults F6:Original Values F10:Save & Exit
http://www.tyan.com
AMI BIOS EASY SETUP UTILITY Ver.1.16
Exit
Load configuration
settings giving
highest performance.
® ¬
43
Setup Help
-
Previous Item
¯
Next Item
Select Menu