Allis-Chalmers WD Operating Instructions And Repair Parts Illustrations page 35

Order all repair parts for this machine from
your local Allis-Chalmers dealer.
To guide you in ordering repair parts, we
When ordering repair parts for your tractor,
supply the following information:
1. The tractor and engine serial numbers.
The serial number of your tractor is lo-
cated at the left brake cover or the left
rear of axle housing. Give the complete
number and prefix letter.
WD-4004.
The engine serial number is located on
left hand side of the engine as shown below.
Unless claims for shortages or errors are
made immediately upon receipt of goods, they
will not be considered.
When broken goods are received, a full de-
scription of the damage should be made by
the carrier agent on the freight bill. If this
description is insisted upon full damage can
always be collected from the transportation
company.
No responsibility is assumed for delay or
Order Repair Parts By Description. Always Give the Tractor and Engine Serial Numbers.
REPAIR PARTS SECTION
REPAIR PARTS
HOW TO ORDER REPAIR PARTS
Example:
4. Always print your name and post office ad-
IMPORTANT
35
have prepared the following illustrations
which identify the various assemblies and
the basic parts of your tractor.
Give complete number and all the letters.
Example: WD.185607GA
front axle model.
3. State the common name of the part you
wish to order, or a description of the part
and its location on the tractor.
dress, where parts are to be shipped; also
specify whether material is to be shipped
by freight, express or parcel post.
responsibility ceases upon delivery of ship-
ment to the transportation company, from
whom a receipt is received showing that ship-
ment was in good condition when delivered to
them; therefore, claims (if any) should be
filed with the transportation company and not
with Allis-Chalmers Manufacturing Company.
The right is reserved to change the construc-
tion or material of any parts where it seems
desirable to do so, without incurring the obli-
gation of installing such changes on units
already delivered.