Advertisement
5.3 Press Teach-In button of only one Transmitter. If Teach-In is
successful, the LCD will show 'OK'. The Transmitter is now
taught into position 1 of the Receiver.
5.4 Record Location and Teach-In position of each Transmitter for
future reference.
5.5 If more Transmitters remain to be taught in, press button on
Receiver again to scroll to the next position and repeat steps
5.3 and 5.4.
5.6 If a position is skipped, scroll on to end the Teach-In process.
This is indicated by '- -' on LCD. Return to step 5.2, this time
scrolling past all Teach-In positions to the required position.
6.
Teach-In to Existing System
6.1 Follow steps 5.2 – 5.6 for all new Transmitters, but scroll past
all Teach-In positions to a vacant position. Taught-in positions
are indicated by 'PRESENT' displayed in the lower middle of
the LCD.
Mounting
EN1B-0003UK0 7 0402
11
Advertisement
