Oki 390/391 Handbook page 117

IBM
Function
Miscellaneous
Commands
Select Emulation Mode
Cancel
110
Commands
(ASCII, Decimal, Hexadecimal)
ASCII: ESC { n
Dec: 27 123 n
Hex: 1B 7B n
ASCII: CAN
Dec: 24
Hex: 18
Notes
m=9: Double density, 24-pin, 120 dpi
[same as ESC * 33]
m=11: Triple density, 24-pin, 180 dpi
[same as ESC * 39]
m=12: Hex-density, 24-pin, quasi-360
dpi [same as ESC * 40]
l, h=0 to 255: specifies amount of subse-
quent Bit Image bytes received,
calculated as l + (h x 256)
OKI unique command. Switches printer
emulation mode, copying the custom
character data in buffer and saving the
print and receive buffers. MENU set-
tings unaffected.
n=0: IBM emulation (general)
n=2: IBM X24e PPR, XL24e PPR
n=3: IBM X24e AGM, XL24e AGM
n=64: Epson emulation (general)
n=66: Epson LQ 850, LQ 1050
Clears buffer and cancels single double-
width set by SO or ESC SO command;
does not affect custom characters or oth-
er commands.
Appendix D: Priner Commands