Oki 390/391 Handbook page 108

IBM
Function
Set Form Length in Lines
Set Skip Over Perforation
Cancel Skip Over
Perforation
Set Top of Form
Cut Sheet Feeder
(Option)
Cut Sheet Feeder Control
ML390/391 Turbo Printer Handbook
Commands
(ASCII, Decimal, Hexadecimal)
ASCII: ESC C n
Dec: 27 67 n
Hex: 1B 43 n
ASCII: ESC N n
Dec: 27 78 n
Hex: 1B 4E n
ASCII: ESC O
Dec: 27 79
Hex: 1B 4F
ASCII: ESC 4
Dec: 27 52
Hex: 1B 34
ASCII: ESC EM n
Dec: 27 25 n
Hex: 1B 19 n
Notes
Sets page length in lines, relative to cur-
rently selected line spacing, calculated
by multiplying value of n by line spac-
ing ratio.
n=1 to 255
This command cancels Skip Over Perfo-
ration setting.
Activates Skip Over Perforation feature
and sets it for n lines at the current line
spacing. When the printer reaches the
bottom of the page, it will skip n lines to
next top of form. Command overrides
menu.
n=1 to 255 lines
n=0: command ignored
Deactivates Skip Over Perforation.
Command override menu.
Sets top of form at current printhead po-
sition. Command ignored in CSF or Au-
to-Feed mode.
OKI unique command. Controls Cut
Sheet Feeder accessory.
n=1: Select bin 1
n=2: Select bin 2 (if present)
n=73 (ASCII "I" ): Insert sheet
n=82 (ASCII "R" ): Eject sheet
101