Advertisement
20
English
35_021_2431_2_DFU-Luxury_A6_v4.indd 20
2 Remove and discard the brush head.
Cover the entire handle with a towel or
cloth.
3 Hold the top of the handle with one hand
and strike the handle housing 0.5 inch
above the bottom end. Strike firmly with
a hammer on all 4 sides to eject the end
cap.
Note: You may have to hit on the end several
times to break the internal snap connections.
4 Remove the end cap from the toothbrush
handle. If the end cap does not release
easily from the housing, repeat step 3 until
the end cap is released.
5 Holding the handle upside down, press
the shaft down on a hard surface. If the
internal components do not easily release
from the housing, repeat step 3 until the
internal components are released.
6 Remove the rubber battery cover.
15/02/17 12:15
Advertisement
