Advertisement
Charging with the charging base
Charging with the travel case (specific types only)
35_021_2431_2_DFU-Luxury_A6_v4.indd 11
1
Put the plug of the charging base in the
power outlet.
2 Place the handle on the charging base.
The flashing light of the battery level
indicator indicates that the toothbrush is
charging.
- 1 solid green LED indicates that the
toothbrush is 34-66% charged.
- 2 solid green LEDs indicate that the
toothbrush is 67-94% charged.
- 3 solid green LEDs indicate that the
toothbrush is fully charged.
Note: If the battery charge of your Philips
Sonicare is low, you hear 3 beeps and 1 solid
green LED on the battery level indicator
flashes yellow for 30 seconds after the
2-minute brushing cycle.
Note: To keep the battery fully charged
at all times, you may keep your Philips
Sonicare on the charging base charger or in
the charging case when not in use.Once the
Philips Sonicare is fully charged, the charger
draws minimal energy from the power outlet.
Follow these steps to charge your Philips
Sonicare with the charging travel case
provided:
1
Place the handle in the charging travel
case.
11
English
15/02/17 12:15
Advertisement
