Connect The Speakers - Logitech Z200 Complete Setup Manual

CONNECT THE SPEAKERS

1 Connect the DC power plug to the back of your right speaker and connect your AC adapter
to the electrical outlet
2A Connect to the 3 5 mm audio jack on your source device using the attached 3 5 mm auxiliary
input on the right speaker
2B You can also connect a device to the auxiliary input port on the front of the right speaker
3 (Optional) Connect your headphones to the headphone jack on the front of the right speaker
4 Turn the speaker on using the power knob
1
3
2A
2B
4
3.5mm
English 4