Connect The Speakers - Logitech Z207 Complete Setup Manual

CONNECT THE SPEAKERS

1 Connect the DC power plug to the back of your right speaker and connect your AC adapter
to the electrical outlet
2 Connect to the 3 5 mm audio jack on your source device using the 3 5mm auxiliary input
on the back of the right speaker
3 (Optional) Connect your headphones to the headphone jack at the front of the right speaker
4 Turn the speaker on using the power knob
5 To pair your devices with speakers using Bluetooth, press the Bluetooth pairing button
for 3 seconds until the LED starts blinking Turn on Bluetooth on your device and select
"Logi Z207" to connect to it The LED will then turn to a steady blue light after pairing
1
3
5
Logi
Z207
3 sec
2
3.5mm
4
English 4