Logitech Z150 Manual

KNOW YOUR PRODUCT

CONNECT THE SPEAKERS

1. Connect the DC power plug to the back of your right speaker and connect your AC adapter to the electrical outlet
   
2. 1. Connect your source device using the attached 3 5mm auxiliary input on the right speaker
      
   2. You can also connect a device to the auxiliary input jack on the front of the right speaker
      
3. (Optional) Connect your headphones to the headphone jack on the front of the right speaker
   
4. Turn the speaker on using the Power/Volume knob
   

ADJUST THE VOLUME

Increase (or decrease) the volume of speakers by rotating the single volume control knob clockwise (or counter-clockwise) on the right speaker.

www.logitech.com/support/Z150

© 2019 Logitech Logitech, Logi and other Logitech marks are owned by Logitech and may be registered All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

WEB-621-001219 002