Operations; Basic Operation - Clarion FZ104PAE Owner's Manual & Installation Manual

5. OPERATIONS

Basic Operation

Note: Be sure to read this chapter referring the
chapter "3. CONTROLS"
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised
to the maximum level it may cause hearing
damage. Be careful about adjusting the
volume.
Clock Priority Display
Press and hold [ / MUTE ] button on front panel
to power off the unit, the LCD will display the clock.
Note: when the unit is idle for more than
10 seconds, the LCD also will display the clock.
Setting The Clock
1. Press [ MENU ] button to enter System Menu.
2. Press [ ] or [
3. Rotate the [VOLUME] knob to set clock, rotating
the [VOLUME] clockwise to adjust the minutes
and counterclockwise to adjust the hours.
Power On/Off
Note:
•
Start the engine before using this unit.
•
Be careful about using this unit for a long time
without running the engine. If you drain the
vehicle battery too far, you may not be able
to start the engine and this can reduce the
service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
2. Press the [ / MUTE ] button to turn the power
On or Off .
] button to select the Clock.
Engine ON
position
Selecting a mode
1. Press the [SOURCE] button to display source
menu.
* External equipment not connected to this unit
is not displayed.
Adjusting the volume
1. Rotating the [VOLUME] to increase/decrease
the volume.
The adjustable range of volume is 0 to 46.
Adjusting the volume
Press the [MUTE] button to turn the mute On and
Off.
XBS On/Off
Press the [XBS] button on front panel to turn On
or Off the X-BASS booster function.
Display System information
Press the [DISP] button on the front panel to
switch the display information, system time and
playing source.
4
FZ104PAE