Operations; Basic Operation - Clarion CMS4 Owner's Manual And Installation Instructions

5. OPERATIONS

Basic Operation

Note: Be sure to read this chapter referring
chapter " 4. CONTROLS "
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level it may cause hearing
damage. Be careful about adjusting the
volume.
Turning on and off the power
Note:
Start the engine before using this unit.
Be careful about using this unit for a long time
without running the engine. If you drain the
vessel battery too far, you may not be able to
start the engine and this can reduce the service
life of the battery.
1. Start the engine.
2. If the CMS4 does not automatically turn on,
Press the [ /SRC] button to turn the power
on. Press and hold it (2 sec.) to bring up the
Power Off/Display Off selection. Select Power
Off to completely power down the CMS4 unit.
Select Display Off to keep the CMS4 operating
with the display backlight off.
Selecting a mode
1. Press the [ / SRC ]
the next available source.
If a Bluetooth device is not connected to
*
the CMS4, it is not displayed.
to the
Engine ON
position
button to change to
Adjusting the volume
1. Rotate [ VOL ] knob clock-wise to increase
the volume .
2. Rotate [ VOL ] knob counter clock-wise to
decrease the volume .
CAUTION
While boating, please be aware of the
volume levels in residential, family areas
and local volume level ordinances.
Mute
Press the [ VOL ] button to turn the Mute On and
Off .
Power Off / Display Off
This feature will allow the user to Power Off the
unit or to turn the Display OFF in the event the
display is too bright for current lighting conditions.
Power Off – Select to turn off the unit
Display Off – Select to turn off the backlight of
the display, but the button and knob illumination
will remain until a button or knob action occurs.�
®
7
CMS4