Usb Mode Operation; Aux Mode Operation - Clarion FZ104PAE Owner's Manual & Installation Manual

USB Mode Operation

Connect
1. Slide the USB socket cover to
2. Insert the USB device into the USB socket. The
unit starts playing from the USB device.
3. To remove the USB device, you should first
select another source or turn off the power, in
order to avoid damaging the USB device. Then
take off the USB device.
Selecting a Track
1. Press the [ ] button to advance to the next
track/song.
Press the [ ] button to go to previous track/
song.
2. Press and Hold in the [
forward through the track/song.
Press and Hold in the [
backward through the track/song.
Play / Pause
Press the [ ] button to pause the track/song
that is currently playing.
Press the [ ] button to resume playing the
track/song that has been paused.

AUX Mode Operation

Press the [SOURCE] button on the front panel to
select "AUX-1".
AUX-1 is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
Note: The detailed connection of AUX-2, please
refer to the rear diagram in chapter
"INSTALLATION AND WIRE CONNECTION".
7
FZ104PAE
This function allows you to select a folder
left.
containing MP3/WMA files and start playing from
the first track in the folder.
Press the [ 5 /  6] button to select a folder.
1. Press the [BAND / SEARCH] button on front
panel access the MP3 / WMA file search mode.
2. Rotate the [VOLUME] knob to search through
all folders on the device then press [
to make your selection.
3. Rotate the [VOLUME] knob to select the
desired track within the previously selected
folder and press [
During playback, pressing the [DISP] button
will automatically cycle through the following
] button to fast
information on the file being played on the LCD:
FOLDER NAME -> FILE NAME -> ALBUM ->
] button to fast
TITLE -> ARTIST
Folder Select
Search Function
/ MUTE ] to start playing.
Display Function
Left Track
Right Track
Ground
3.5mm Cable (not included)
Portable audio player,
/ MUTE ]
etc.