Symptom
NO BELT
Motor turns but belt
MOVEMENT
(cont'd)
foreign object under
Support Services 800-883-8783
Page 6
Probable Cause
does not.
Belt cannot be
Perform the Amp Draw Test (page 20) to check
moved manually-
for excessive amp draw damage
belt.
Corrective Action
•
Check belt tension.
•
Set belt tension to 1/8-inch deflection or
correct tension can be verified by
twisting the belt almost to a 90-degree
position.
--------
•
Remove foreign object.
Mon-Fri 8:30am-5:00pm Central Time Zone
Recommended Tools
Note:
All trouble
shooting should
be performed in
calibration
mode.
Page 16
Fax: 636-272-7148