Maintenance Fundamentals - Honda CBR 2018 Series Owner's Manual

Maintenance Fundamentals

Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your motorcycle:
Tire tread wear and air pressures are within
●
limits. P. 47
2
Lights, horn, and turn signals operate
●
normally.
Check the condition of the drive chain.
●
Adjust slack and lubricate as needed.
P. 44
2
Check the following items if you are carrying a
passenger or cargo:
Combined weight is within load limits.
●
P. 126
2
Cargo is secured properly.
●
Suspension is adjusted to suit load.
●
Check the following items after you get on your
motorcycle:
Throttle action moves smoothly without
●
binding. P. 80
2
Brake lever and pedal operate normally.
●
Check the fuel level and refuel when
●
needed. P. 13,
2 2
Engine stop switch functions properly.
●
P. 24
2
Check the following items at regular intervals:
Oil level is between the upper and lower
●
level marks. P. 62
2
Brake fluid level is
●
Front: above the LWR level mark.
Rear: between the UPPER and LOWER level
marks. P. 69
2
Engine coolant level is between the UPPER
●
and LOWER level marks.
Side stand functions properly.
●
P. 83
2
P. 29
P. 69
2
P. 67
2
P. 72
2
37