Table of Contents
Advertisement
Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your motorcycle:
Fuel level - Fill fuel tank when necessary.
●
P. 113
2
Throttle - Check for smooth opening and
●
full closing in all steering positions.
Engine oil level - Add engine oil if necessary.
●
Check for leaks.
P. 143
2
Coolant level - Add coolant if required.
●
Check for leaks.
P. 147
2
Drive chain - Check condition and slack,
●
adjust and lubricate if necessary.
Brakes - Check operation;
●
Front and Rear: check brake fluid level and
pads wear.
Lights and horn - Check that lights,
●
indicators and horn function properly.
Engine stop switch - Check for proper
●
function.
Clutch - Check operation;
●
Adjust freeplay if necessary.
Side stand ignition cut-off system - Check
●
for proper function.
Wheels and tyres - Check condition, air
●
P. 160
2
pressure and adjust if necessary.
P. 149,
P. 150
2
2
P. 100
2
P. 157
2
P. 152
2
P. 153
2
P. 132
2
121
Advertisement
Chapters
Table of Contents
