Honda CBR 2018 Series Owner's Manual page 69

Install the new oil filter with the OUT-SIDE
8.
mark facing out.
Install the oil filter spring into the oil filter
9.
cover, and then install the new gasket and
oil filter cover by tightening the oil filter
cover bolts.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Install a new sealing washer onto the
10.
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
Fill the crankcase with the recommended oil
11.
( P. 43, P. 127) and install the oil fill cap.
2 2
Required oil
When changing oil & engine oil filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
Engine Oil Changing Engine Oil & Filter
u
Check the oil level.
12.
Check that there are no oil leaks.
13.
Install the right under cowl and right
14.
middle cowl.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
Oil filter cover
Gasket
Oil filter cover bolts
P. 62
2
Spring
Oil filter
OUT-SIDE mark
65