Honda CBR 2018 Series Owner's Manual page 98

Tire Puncture Removing Wheels
u
Remove the rear axle shaft, washer B,
5.
brake caliper bracket, side collars and rear
wheel.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
brake caliper is removed.
Installation
To install the rear wheel, reverse the
1.
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
94
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Make sure that the lug on the brake
2.
caliper bracket is positioned in the slot on
the swingarm.
Brake caliper bracket
Swingarm
Slot
Lug