Rear Seat - Honda CBR 2018 Series Owner's Manual

Rear Seat

Prongs
Seat lock
Ignition key
Removing & Installing Body Components
Rear seat
Rear stays
#
Removal
Insert the ignition key into the seat lock.
1.
Turn it clockwise, then pull the rear seat
2.
up and back.
# Installation
Insert the prongs into the rear stays on
1.
the frame.
Push down on the rear of the rear seat.
2.
Make sure that the seat is locked securely
in position by pulling it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.
Rear Seat
u
57