Set Date/Time - AT&T BL102 Quick Start Manual

Telephone settings
Telephone settings

Set date/time

The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week
can be calculated from the caller ID information.
After handset registration or a power failure, the handset will
prompt you to set the date and time.
1. When the handset is in idle mode, press MENU/
main menu.
2. Press q
CID
/SELECT.
MENU
3. Press q
CID
/SELECT, or enter the number using the dialing keys.
MENU
4. Press q
CID
enter the number using the dialing keys.
5. Press q
CID
the dialing keys, then press
time.
6. Press q
CID
or enter the number using the dialing keys.
7. Press q
CID
or enter the number using the dialing keys.
8. Press q
CID
to confirm.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and day not
set, " before it plays the message.
or p to scroll to Set date/time and then press
DIR
or p to select the month, then press
DIR
or p to select the day, then press
DIR
or p to select the year, or enter the number using
DIR
or p to select the hour, then press
DIR
or p to select the minute, then press
DIR
to select AM or PM, then press
or p
DIR
/SELECT to move on to set the
MENU
16
to enter the
SELECT
/SELECT, or
MENU
/SELECT,
MENU
/SELECT,
MENU
/SELECT
MENU