GE JGRP20 Owner's Manual page 6

Built-in gas wall oven
Hide thumbs Also See for JGRP20:
Table of Contents

Advertisement

Oven Controls
1. BAKE:
Touch this pad to select the bake function.
Bake Light:
change the oven temperature at this point. Glows
when the oven is in bake mode.
2. BROIL HI/LO:
function. See the Cooking Modes section for more
information.
Bake Light:
when the oven is in bake mode.
3. DISPLAY:
Shows the operations you have
selected, the time of day and the cooking status.
4. COOKING TIME:
touch the + or – pad to set the amount of time you
want your food to cook. The oven will shut off when
the cooking time has run ou
5. DELAY START:
TIME or SELF CLEAN pad to set the oven to start
and stop automatically at a time you set.
6. OVEN LIGHT ON/OFF:
turn the oven light on or off.
7. TIMER/CLOCK:
timer feature. Then touch + and – pads to adjust
time. To set the clock, touch this pad twice and hold
3 seconds and then touch the + and – pads. The
time of day will flash in the display when the oven is
first turned on.
6
Touch this pad to select the broil
Touch this pad and then
Touch this pad to
Touch this pad to select the
8. START:
Must be touched to start any cooking
function.
9. – Pad:
Short taps to this pad will decrease the
time or temperature by small amounts. Touch and
hold the pad to decrease the time or temperature by
larger amounts.
10. + Pad:
Short taps to this pad will increase the time
or temperature by small amounts. Touch and hold
the pad to increase the time or temperature by larger
amounts.
11. CLEAR/OFF:
Touch this pad to cancel ALL oven
operations except the clock and timer.
12. SELF CLEAN:
Touch this pad to select the self-
oven section.
13. CLEAN LIGHT:
you can change the length of time for the self-clean
cycle at this point. Glows when the oven is in the
self-clean cycle. After the self-clean cycle, the light
If "F–" and a number or letter flash in the display and the
oven control signals, this indicates a function error code.
Touch the CLEAR/OFF pad. Allow the oven to cool for
If function error code repeats, disconnect power to the
oven and call for service.
49-80713 Rev. 2

Advertisement

Table of Contents
loading

Table of Contents