Definitions: Safety Guidelines - DeWalt DW743N Series Original Instructions Manual

FLIP-OVER SAW
DW743N, DW743K
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e
Technical Data
Voltage
UK & Ireland
Type
Power input
230 V tools
115–120 V tools
No-load speed min
Blade diameter
Blade bore
Blade body thickness
Blade tooth thickness
Riving knife thickness
Mitre (max. positions)
right
Bevel (max. positions)
Automatic blade brake time
Weight
Cutting Capacities
Mitre saw Mode (Fig. F)
Cutting angle
Straight cross-cut
Table turned 45° right for mitre cuts
Table turned 45° left for mitre cuts
Sawhead tilted 45° left for bevel cuts
Bench saw Mode
Max. ripping capacity left/right
Depth of cut at 90°
Depth of cut at 45°
Noise values and/or vibration values (triax vector sum) according to EN61029-2-11:
L (emission sound pressure level) dB(A)
PA
L (sound power level) dB(A)
WA
K (uncertainty for the given sound level) dB(A)
m/s
Vibration emission value a =
h
Uncertainty K = m/s
The vibration and/or noise emission level given in this information sheet has been measured in
accordance with a standardised test given in EN61029 and may be used to compare one tool
with another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level represents the main
applications of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should also take
into account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration
and/or noise such as: maintain the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
DW743N DW743N
QS/GB LX
V 230 –
AC
V 230/115 115
AC
4 4
W 2000 2000
W 1700 1700
-1 2850 2850
mm 250 250
mm 30 30
mm 2.2 2.2
mm 3 3
mm 2.3 2.3
left 45° 45°
45° 45°
left 45° 45°
s < 10 < 10
kg 37 37
Size of material Notes Workpiece place
against fence (X)
H mm B mm
20 180 No packaging piece
30 176
40 170
68 140
85 26 Cross-cut at max.
70 95
20 130
50 140
mm 210/210 210/210
mm 0–62 0–62
mm 0–32 0–32
93 93
106 106
2.9 2.9
2 2.0 2.0
2
1.5 1.5
EC-Declaration of Conformity
Machinery Directive
DW743K
Flip-Over Saw
QS
DW743N, DW743K
230
WALT declares that these products described under Technical Data are in compliance with:
D
e
230/115
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-11:2012 +A11:2013.
4 These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
please contact D WALT at the following address or refer to the back of the manual.
e
The undersigned is responsible for compilation of the technical file and makes this declaration
2000
on behalf of D WALT.
e
1700
2850
250
30
Markus Rompel
2.2
Vice President of Engineering, PTE-Europe
3
D WALT, Richard-Klinger-Straße 11,
e
2.3
D-65510, Idstein, Germany
03.04.2018
45°
45°
WARNING: To reduce the risk of injury, read the instruction manual.
45°
< 10

Definitions: Safety Guidelines

37
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
required
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.

Denotes risk of electric shock.

height Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
210/210 SAVE ALL WARNINGS AND INSTRUCTIONS
0–62
0–32 The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work Area Safety
93
a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
106 b ) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
2.9
or fumes.
c ) Keep children and bystanders away while operating a power tool. Distractions can
2.0
cause you to lose control.
1.5
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e ) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
FOR FUTURE REFERENCE.
English
9