Common Procedures For Servicing Or Installing Features; Before You Begin - IBM Power System AC922 Installing

Figure 40. Inserting a PCIe adapter
6. Using your labels, replace any plugs that you removed from the PCIe adapter. Insert the cables into
the PCIe adapter.
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTC, 8335-GTG, 8335-GTH,
8335-GTW, or 8335-GTX system for operation after you remove and replace internal parts" on page 94.
Common procedures for servicing or installing features in the 8335-GTC,
8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX system
Learn about the common procedures related to installing, removing, and replacing features in the system.

Before you begin

Observe these precautions when you are installing, removing, or replacing features and parts.
About this task
These precautions are intended to create a safe environment to service your system and do not provide
steps for servicing your system. The installation, removal, and replacement procedures provide the step-
by-step processes that are required to service your system.
DANGER: When working on or around the system, observe the following precautions:
82 Power Systems: Installing the System and Ordered Parts for the IBM Power System AC922 (8335-GTX)