Preparing For The Installation Of The Tv; Kd-85Xh95Xx, Ke-85Xh95Xx - Sony SU-WL450 Installation Information

Preparing for the installation
of the TV
Make sure to attach the Table-Top Stand
before installing the TV to the wall by referring
to the Setup Guide.
KD-85XH95xx,
KE-85XH95xx
1
Mark the installation location on
the wall.
 Use masking tape, etc. (not supplied) to
mark the location of the TV near the
Base or Base Adaptor. Refer to the
following table.
Screen centre point
(mm)
Model Name
KD-85XH95xx
1,910
KE-85XH95xx
(1,000)
(300)
Masking tape
644 200 211
− 11 (GB) −
2
Remove the screws from the
rear of the TV.
Note
 Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
6.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Standard mounting (2-a)
Belt 
Screw (+PSW 6 x 50) 
Slim mounting (2-b)
Belt 
Screw (+PSW 6 x 20) 
GB
Pulley 
Screw
(+PSW 6 x 20) 
Spacer
(60 mm) 
Pulley 
Spacer (20 mm)
