Advertisement
Quick Links
John Lewis
Stock code double stone : 810/80504
Stock code double mink : 803/46404
Stock code double grey : 803/46506
Thank you for purchasing this Emily storage bed. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 90 MINUTES to assemble with 2 PEOPLE.
Do not use power tools to assemble.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembl
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Emily Storage Bed
y.
1/8
Stock code king stone: 810/80505
Stock code king mink : 803/46405
Stock code king grey : 803/46507
For product support or spare parts please call
the John Lewis Helpline;
E: mail@fwgroup-uk.com
T: 01244 689949
Advertisement
Related Manuals for John Lewis Emily 810/80504
Summary of Contents for John Lewis Emily 810/80504
- Page 1 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fittings and parts checklist M4 Allen Key x 1 pcs M8 X 16mm Bolt x 8 pcs M6 X 25mm Bolt x 2 pcs M5 Allen Key x 1 pcs Centre Plastic Caps x 15 pcs M6 X 40mm Bolt x 8 pcs Screw 4 x 50mmx 4pcs Side Plastic Caps x 30 pcs Spring Washer M8 x 8 pcs...
- Page 3 Step by step assembly instructions Step One Place Wooden Legs (6) into the holes in the underside of the Headboard (1) and Footboard (2) as per diagram below and twist into place so they are fully secured. Wooden Leg Preinserted Nut Head/Foot Board Legs x 4...
- Page 4 Step Three Attach Spring Washer M8 (E) and JCBC M8 x 16mm Bolts (F) into the metal fixings on to both Bottom Supports (7) (only for the top side). Insert the Bottom Supports (7) inside the bed frame as shown in step 2. Next, attach the Spring Washer M8 (E) and JCBC M8 x 16mm bolts (F) into the bottom side of metal fixing on the bottom supports.
- Page 5 Step Five Insert Centre Rail (5) into the brackets on the Headboard (1) and Footboard (2). Push down fully and secure in place using M6 x 25mm Bolts (G). Tighten using M4 Allen Key (A). You can now tighten the bolts with M5 Allen Key (B) at the Side Rails from Step Two so all fastenings are now tightened.
- Page 6 Step Seven Attach Drawer Panel (13) to drawer and tighten together using M6 x 40mm Bolt (H).Tighten with M4 Allen Key (A). M4 Allen Key x 1 M6 x 40mm Step Eight Attach Metal Stopper (16) to the Bottom Support (7) using screw 4 x 18mm (K). Screw 4 x 18 (8) Metal Stopper x 4...
- Page 7 Step Nine With the curved side facing upwards, insert 2 Slats (4) into a Centre Plastic Cap (C) followed by a Side Plastic Cap (D) onto the other end of both slats. Use your palms to push down the centre plastic caps into the centre rail followed by the side plastic caps into the side rail as shown in diagram below.
-
Page 8: Care And Maintenance
Please be careful to retain all fittings when doing this. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.