Summary of Contents for John Lewis Darton Groove 810/80701
Page 1
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
Page 2
Fittings and parts checklist Fittings Cam x 2 Allen Key - 4mm x 1 ( 12 x 10.5 mm) Bolt x 2 Bolt x 8 (M8 x 22 mm) (M6 x 24 mm) Dowel x 3 Screw x 24 10 x 30 mm) (30 mm) Parts Headboard x 1...
Page 3
Step by step assembly instructions Step One Screw the Bolts (E) into the holes indicated on the Top Rail (3). E x 2 pcs Step Two Place the Dowels (F) into the holes in the Headboard (1) and press down the Top Rail (3) onto the Headboard (1).
Page 4
Step Three Fix the Side Rails (4) to the Headboard (1) and Footboard (2) using Bolts (B) as shown below. Tighten using Allen Key (A). B x 8 pcs...
Page 5
Step Four Place one of the Slats (5) at the top of the Headboard then slide the rest down the bed until the last one reaches the Footboard, ensuring the end Slats are as close to the Headboard and Footboard as possible. Fix all Slats (5) in place using Screws (C).
Care and Maintenance Wood furniture Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.
If you need any additional information or have any issues with this product please call the John Lewis helpline on 01244 689949 or email mail@fwgroup-uk.com This bed is for use with a standard single size mattress L190 x W90 x H18.