Advertisement
Step Five
Insert Centre Rail (5) into the brackets on the Headboard (1) and Footboard (2). Push down fully and
secure in place using M6 x 25mm Bolts (G). Tighten using M4 Allen Key (A). You can now tighten the bolts
with M5 Allen Key (B) at the Side Rails from Step Two so all fastenings are now tightened.
M6 x 25mm (G)
M4 Allen Key (A)
A.
G.
M6 x 25mm Bolt x 2
M4 Allen Key x 1
Step Six
To construct the drawers, fix Drawer Back (10) with one end of each Drawer Support (14) using
Screws 3.5 x 30mm (J) as shown in Fig.1, then fix the Drawer Sides (9) to the Drawer Back (10). Next,
insert Drawer Bottom (12) and then fix Drawer Front (11) using Screws 3.5 x 30mm (J) as shown in Fig.2.
Finally, secure the other end of the Drawer Supports (14) to the other side of the drawer and tighten using
a cross head screw driver.
Fig. 1
10
9
(x2)
J.
Cross Head
Screw Driver
3.5 x 30mm(40)
3
5
2
3
Fig. 2
10
9
9
5/8
1
1
Fig. 3
9
12
(x2)
AFTER INSERTING CENTRE
RAIL, TIGHTEN ALL FIXINGS
FULLY INCLUDING BOLTS
AT SIDE RAILS (FROM
STEP TWO)
14
14
14
(x2)
Advertisement
