John Lewis Emily 810/80504 Instructions Manual page 7

Step Nine
With the curved side facing upwards, insert 2 Slats (4) into a Centre Plastic Cap (C) followed by a Side
Plastic Cap (D) onto the other end of both slats. Use your palms to push down the centre plastic caps
into the centre rail followed by the side plastic caps into the side rail as shown in diagram below.
Step 1
4
C 4
x15
4
D
Step Ten
The bed is now ready for use.
C
4
Step 2
D
4
x30
D
7/8
4.
Slats (30pcs)
C.
Centre Plastic Caps (15 pcs)
D.
Side Plastic Caps (30 pcs)