Canon iR2545i Troubleshooting Manual page 9

Cause The scanned document data is too large for the machine's memory.
Remedy Print the already scanned pages and continue scanning the remaining pages.
Remedy Divide the original into smaller batches and scan them one by one.
The number of search results has exceeded limits. If the desired destination is
not displayed, change the search conditions and try again.
Cause The number of addresses that meet the search criteria exceeds the specified maximum number
of addresses to search.
Remedy Narrow down the search criteria, and then search again.
Remedy Increase the maximum number of addresses to search.
The platen glass is dirty.
Cause The feeder scanning area is dirty.
Remedy Clean the feeder scanning area.
There are too many subdirectories.
Cause You have exceeded the maximum number of subdirectory levels allowed.
Remedy The directory level that you are trying to access cannot be specified. Specify a different
destination.
The send function currently cannot be used. Confirm with administrator.
Cause All the sending functionalities are disabled.
Remedy Check the following settings:

<Send Restriction Settings> on the Send Function Authentication Settings page

Use Scan to Memory Media in Memory Media Settings
Transmission has been suspended. Contact system manager.
Cause Although [Specify LDAP authentication user address as the sender name] is selected, the
machine cannot obtain an e-mail address attribute from an authentication server.
Remedy Deselect [Specify LDAP authentication user address as the sender name].
Cause You tried to send e-mails or I-faxes when the machine is in the User ID Management with the e-mail
address of the login user not registered.
Remedy Register the e-mail address for each user when User ID Management is enabled.
Page 9 of 39