Other Problems - Canon iR2545i Troubleshooting Manual

and grime in the feeder from appearing on your copies and prints.
Images are obliquely printed.
Cause The original or paper placed is not aligned to the appropriate guides or edges.
Remedy Make sure that the original and paper are placed properly.
The backside of the prints is smudged.
Cause The transfer roller is dirty.
Remedy Clean the transfer roller.
Toner smudges or bleeds easily on prints.
Cause In a high-humidity environment, excessive moisture inside the machine may cause toner to
smudge or bleed on prints.
Remedy Depending on device, switch on special mode designed to prevent excessive moisture inside
the machine from adversely affecting prints.

Other Problems.

Staples are jammed.
Cause Staples are jammed in the finisher.
Remedy Remove the jammed staples from the finisher.
Prints are not delivered to the correct paper output tray.
Cause The functions for required tray, has not been selected.
Remedy Select the desired output for required Tray . The prints for the selected functions are delivered to
the correct paper output tray.
Black streaks appear on the original after passing through the feeder.
Cause The feeder scanning area/rollers are dirty.
Remedy Clean the feeder scanning area and rollers.
Page 4 of 39