Canon iR2545i Troubleshooting Manual page 11

Cause The settings on your machine do not match the settings on the recipient's machine.
Remedy Check that the settings on your machine match those on the recipient's machine, and that the
recipient's machine is able to communicate. Try sending again.
Cause No pause is inserted in the fax number when sending a fax overseas.
Remedy Insert a pause after the international access code or after the recipient's fax number, and then
dial the number again.
Cause Long Distance on the Option screen is set to 'Domestic' when sending a fax overseas.
Remedy Set Long Distance to 'Long Distance (1)', 'Long Distance (2)', or 'Long Distance (3)', and then
dial the number again.
# 0037
Cause Documents could not be received because there is insufficient memory available.
Remedy Delete unwanted documents and documents with errors from memory to increase the amount of
available memory
# 0059
Cause Your transmission was canceled because the number you dialed was different from the number
registered on the other party's fax machine.
Remedy Check to see that the correct fax number is registered on the other party's fax machine.
# 0099
Cause A job was canceled during transmission to a USB memory media device.
Remedy Try sending again if necessary.
# 0401
Cause The USB memory media device is full or the maximum number of files that can be stored in the
root directory (the top level of the directory tree in the USB memory media device) has been
reached.
Remedy Delete unnecessary files in the USB memory media device or organize the files in the root
directory by moving existing files to a newly created folder.
# 0403
Cause The job failed because a file with the same name already exists. Generally, if a file with the
same name exists, a number ranging from 1 to 999 is added to the tail of the name to prevent
naming conflicts. However, this error occurred because a file with the same number added to its
file name already exists.
Remedy Rename the file, and then write the data again.
# 0404
Cause The job failed because the write protect switch of the USB memory media device was on.
Remedy Turn off the write protect switch of the USB memory media device.
# 0406
Page 11 of 39