Voltage Regulation - Tripp Lite SmartOnline SU2200RTXL2UA Specifications

Expandable runtime BP48V24-2U
description
DC system voltage 48
(VDC)
Battery recharge rate Less than 6 hours from 10% to 80%
(included batteries)
Replacement battery RBC94-2U
cartridge (internal
UPS battery
replacement)
Battery Access Front panel battery access door
Battery replacement Hot-swappable, user replaceable sealed, flame retardant, non-spillable batteries
description

VOLTAGE REGULATION

Voltage regulation Online, double-conversion power conditioning
description
Overvoltage 2% output voltage regulation during overvoltages to 150
correction
Undervoltage 2% output voltage regulation during undervoltages to 80
correction
Severe undervoltage 2% output voltage regulation during undervoltages to 65 (under 70% load only)
correction
LEDS ALARMS & SWITCHES
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery
and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in
rack/tower formats
Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel Power-fail alarm can be silenced using alarm-cancel switch
operation
Switches 2 switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression 570
joule rating
UPS AC suppression Instantaneous
response time
UPS Dataline 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
suppression
EMI / RFI AC noise Yes
suppression
PHYSICAL
Installation form 4 post 19 inch rackmount (mounting rail kit included)
factors supported
with included
accessories
Installation form 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
factors supported
with optional
accessories
Primary form factor Rackmount
(limit 2 w/ 48VDCSPLITTER)