Ricoh TR5050 Field Service Manual page 9

No. Part
1 Cut HP sensor
2 Exit sensor
3 Exit motor
4 Feed motor
5 Scrap hopper HP sensor
6 Entrance sensor
7 Scrap hopper full sensor
8 Door switch
9 Cutter motor
No. Part
10 End Fence Switch
11 Exit tray sensor 3
12 Tray motor
13 Exit tray sensor 2
14 Exit tray sensor 1
15 Cut position Motor
16 Press Stopper motor
17 Stopper assembly
HP sensor
18 Press Stopper HP
Detects the home position of the movable blade of the cutter unit.
Detects that a trimmed paper stack is output to the paper tray.
Transports the trimmed paper stack to the output tray.
Moves the transport belt in the feed unit.
Detects the home position of the scrap hopper.
Detects the feeding of paper.
Detects when the scrap hopper is full.
Detects when the door is open, and cuts off the power voltage.
Drives the cutter unit.
Turns off when the user removes the stopper, and automatically
switches to limitless mode.
Third sensor detecting exit tray full.
Moves the transport belt of the tray.
Second sensor detecting exit tray full.
First sensor detecting exit tray full.
Moves the stopper that determines the trim position of the booklet.
Lowers/ raises the stopper plate. Also presses the folded end of the
booklet after the trim position is determined.
Detects the home position of the stopper assembly.
Detects the home position of the press stopper and the pressure plate.
1.Detailed Descriptions
Description
Description
5