Advertisement
1
ROUGH-IN SUPPLIES AND WASTE OUTLET
1. Rough-in 3/8" supplies and waste outlet connections.
NOTE: For ease of installation and accessibility, it is
recommended that straight stops with flex supply tubes be
used. As an alternative, if rigid supply risers are used, it is
suggested to use angle stops in place of the straight stops.
1-5/8"
(41mm)
36-1/2"
(927mm)
(457mm)
3
INSTALL GRID DRAIN AND OFFSET TAILPIECE
1. Apply plumber's putty to the underside of flange. Install GRID DRAIN into drain outlet.
2. From the underside of SINK install RUBBER GASKET (flat side up) and FRICTION
GASKET onto GRID DRAIN threads. Apply sealent to threads of GRID DRAIN.
3. Apply sealent to threads of OFFSET TAILPIECE and thread into DRAIN ELL.
4. Thread DRAIN ELL onto GRID DRAIN, tighten and align as shown.
1
7301793-100 Rev. C
SQ-0-4437 FLOOR
MOUNTED SINK
SUPPORT
4"
(102mm)
18"
2
2
INSTALL FAUCET
NOTE: For more detailed information, see the installation
instructions supplied with the ICU FAUCET. #(M965119)
1. Insert WIRES (1), FLEX HOSE (2) and SPOUT SHANK (3)
through center hole of mounting surface.
2. Assemble "C" WASHER (4), STAR WASHER (5) and LOCKNUT
(6) onto threads of SPOUT SHANK (3) from underside of mounting
surface.
3. Align FAUCET and tighten LOCKNUT (6).
3
2
1
2
4
5
6
4
3
4
5
6
3
Advertisement
