Advertisement
Quick Links
ASSEMBLY & INSTALLATION INSTRUCTIONS
Generations 24" Washstand
9210.224.329
VANITY TOP
No top required for
Townsend Vanity Top (sink)
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.
To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading.
Also avoid extreme changes in temperature by arranging furniture away from radiators, heat and air vents,
and air conditioning units. Avoid placing furniture directly under windows.
Recommended Tools & Materials
Adjustable Wrench
Basin Wrench
Tubing Cutter
Roughing-in Dimensions
33"
(838mm)
1-1/4" O.D.
WASTE
14-1/8"
(359mm)
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2008
RECOMMENDED SINKS
0555.104 Townsend Vanity Top (4" centers)
0555.108 Townsend Vanity Top (8" centers)
Channel Locks
Hacksaw
Plumbers' Putty or
Tape
Caulking
Measure
22-1/2"
(570mm)
8"
(203mm)
FINISHED
FLOOR
Pipe Wrench
Putty Knife
TOWNSEND
SINK
SUPPLIES AS
REQUIRED
18"
(457mm)
16"
(406mm)
- 1 -
RECOMMENDED FAUCETS
7005.201 Copeland Center Spread
7005.801 Copeland Wide Spread
Drill
Phillips Screwdriver
Regular Screwdriver
18"
(457mm)
FINISHED
WALL
FINISHED
FLOOR
Level
770002-100
Advertisement
Related Manuals for American Standard Generations 24" Washstand 9210.224.329
Summary of Contents for American Standard Generations 24" Washstand 9210.224.329
- Page 1 Roughing-in Dimensions 33" (838mm) 1-1/4" O.D. WASTE 14-1/8" (359mm) Product names listed herein are trademarks of American Standard Inc. © American Standard Inc. 2008 RECOMMENDED SINKS 0555.104 Townsend Vanity Top (4" centers) 0555.108 Townsend Vanity Top (8" centers) Hacksaw Tape Measure 22-1/2"...
- Page 2 WASHSTAND INSTALLATION Unpack unit carefully, taking care that bottom shelf does not drop and damage front legs (see Figure 2). Provide suitable reinforcement for anchoring the washstand to the wall. Centerline of reinforcement should be 27-3/4" up from the floor (see Figure 1). Rough in supply lines and waste per rough-in dimensions.
- Page 3 TOWNSEND VANITY TOP 0555.104/0555.108 INSTALLATION onto WASHSTAND… Two people recommended for this installation Mount the drain assembly (not included) on the sink. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain.
- Page 4 This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or province to province, in which case this warranty does not affect such statutory rights. In the United States: In Canada: In Mexico: American Standard Inc. American Standard Customer Service Manager P.O. Box 6820 2480 Stanfield Rd.