Installing The Ip Multiline Telephone; Applying Power To The Ip Multiline Telephone; Figure 2-106 Ip Multiline Telephone Connection; Figure 2-107 Ip Multiline Telephone Connectors - NEC SL1100 Hardware Manual

ISSUE 1.0
KSU
VOIPDB-C1
board (CN1)
5.2.2

Installing the IP Multiline Telephone

1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN(=) connector.
2. If the Power feeding is used by
the IP Multiline Telephone Base.
3. The IP Multiline Telephone has a Switching HUB to connect a PC to the LAN Network. Connect
the 10Base-T/100Base-TX straight cable used for connection to the PC to the PC(X) connector
and to the PC.
5.2.3

Applying Power to the IP Multiline Telephone

IP Multiline Telephone (IP4WW-24TIXH-C1) supports two different power sources for the Telephone.
ACA-UA/ AC-LE UNIT

Plug the Optional AC[ ]-[ ] AC adapter input jack in the telephone base unit, and plug the 2-prong
wall plug of the AC adapter in AC outlet.
Hardware Manual
LAN Cable
(10BASE-T/100BASE-TX)
Ferrite Core
Hub
Commercial Power

Figure 2-106 IP Multiline Telephone Connection

AC[ ]-[ ] UNIT, plug the

Figure 2-107 IP Multiline Telephone Connectors

IP Multiline Tel ephone
LAN(=) Connector
PC (X)Connector
PC
AC[ ]-[ ] UNIT cable to the DC input jack on
SL1100
Exit Help
ABC DEF
Flas h Tra nsf e r
1 2 3
GHI JKL MNO
Mute DND
4 5 6
PQRS TUV W XYZ
C lea r /Back
7 8 9
0
Spea ker Hold
AC[ ]-[ ]
UNIT
Commercial Power
2-69