Sony BRS-200 Operational Manual page 79

Technical Appendix
Setting menu Setting item
900 UTILITY.. 960 REMOTE..
STATUS.. 970 FIRMVER..
REBOOT.. 980 REBOOT
962 CONTROL Off, On
BAUD
PARITY
APPLY
LAN.. 963 IPADD
NET MASK 0.0 to 255.255 (255.0)
FTP
APPLY
971 PR
CP
FPGAVER1.. 972 GENLOCK XX.XX (Version indication)
SDI I/O
INPUT
OUTPUT
FPGAVER2.. 973 DVI
OPT IN1
OPT IN2
OPT OUT XX.XX (Version indication)
CODE.. 974 MACADD
H
MACADD L 00000000 (MAC Address
SERIAL
DIAG.. 975 FAN 1
FAN 2
FAN 3
FAN 4
OPTION.. 976 IN SLOT1
IN SLOT2
OUT SLOT DVI, None (indication)
SAVE
CONTINUE
9600, 19200, 38400
None, Even, Odd
Exec
1.1 to 255.255
Disable, Enable
Exec
XX.XX (Version indication)
XX.XX (Version indication)
XX.XX (Version indication)
XX.XX (Version indication)
XX.XX (Version indication)
XX.XX (Version indication)
XX.XX (Version indication)
XX.XX (Version indication)
0000 (MAC Address MSB
indication)
LSB indication)
123456 (product serial
number)
OK, NG (indication)
OK, NG (indication)
OK, NG (indication)
OK, NG (indication)
SDI, DVI, None (indication)
DVI, None (indication)
Exec
Exec
Exec
79
Description
Sets up the REMOTE connector.
Sets up the IP address and network mask of
the switcher for communication with a
computer.
After entering the addresses in IPADD and
NET MASK, set FTP to Enable. When the F4
control (APPLY) is pressed, rebooting is
required to enable the setting.
Allows you to check the version of the
firmware.
Allows you to check the version of the FPGA.
Allows you to check the version of the FPGA.
Allows you to check the MAC address and
serial number.
Allows you to check the condition of the fan.
Allows you to check the type of the interface
board installed in the switcher.
Indicates the executing process.
EBOOT: The switcher reboots when the
F1 control is pressed.
AVE: The SETUP setting data is saved
when the F2 control is pressed.
ONTINUE: Nothing is executed, and the
menu display is restored when the F3
control is pressed.