Advertisement
After you finish
__
Did you receive a cable hook with your rack shipment?
v No. Proceed to the next item.
v Yes. The cable hook manages the server cables in the back of the rack. To install the cable hook, slide it into
the slots that are located on the back of the rack as shown here:
__
Return to your initial server setup checklist and complete the next step.
Related concepts
Installing features and replacing parts
Expansion units
Related tasks
Cabling the HMC
Place the rack-mounted system or expansion unit in the service position
Related information
Adapters, Devices, and Cable Information for Multiple Bus Systems
Cabling a model OpenPower 720 to access the Integrated Virtualization
Manager
Learn how to access the Integrated Virtualization Manager, connect external cables and power cords,
route the cables, and attach devices after you install all of your hardware features or replace parts.
242
System i and System p: Cabling your server
Advertisement
