Advertisement
Connecting the power cords
__
If your server is equipped with a retention bracket, route the power cord under the bracket before you
plug it into the back of the server as shown here:
__
Plug the power cords into the system, display, and attached devices.
Routing the cables through the cable-management arm
__
Is your server installed in a rack?
v No. Proceed to the next section, Starting your server.
v Yes. Do the following:
__
Place the system into the service position. For instructions, see Place the model 51x or 710 in the service
position.
122
System i and System p: Cabling your server
Advertisement
