Table of Contents
Advertisement
RV Series
DC-to-AC Inverter/Chargers
Invert:
Charge:
Quiet Mobile Power
Congratulations! You've purchased the most advanced, feature-rich Inverter/Charger designed for recreational applications. Tripp Lite RV
Inverter/Chargers are the quiet alternative to generators-with no fumes, fuel or noise to deal with! You get AC electricity anywhere and anytime
you need it: away from shore power, rolling down the highway, dry camping in majestic back country or overnighting at a non-electric site. Your
Tripp Lite Inverter/Charger provides your appliances, equipment and electronics with utility- or generator-supplied AC electricity (filtered
®
through premium ISOBAR
your connected battery bank-doing what traditional converter/chargers do. Whenever power blackouts, brownouts or high voltages occur, your
Inverter/Charger immediately and automatically switches over to inverting battery output to power connected AC equipment.
Better for Your Equipment
Better for Your Batteries
Better for You
Owner's Manual
PowerVerter
Input
12 VDC
120V, 60 Hz. AC
surge protection) whenever available. In addition, it automatically powers your craft's 12V system and recharges
* Available on all models except 612 models. †Inverter/Chargers are moisture-resistant, not waterproof.
Copyright © 2005. PowerVerter
®
(v. 3.0)
Output
120V, 60 Hz. AC
12 VDC
Premium Protection Levels
• Built-In ISOBAR
• Automatic Overload Protection
Ideal Output for All Loads (including computers)
• Frequency-Controlled Output
• Fast Load Switching
• Balanced Load Sharing*
Faster Battery Recharge
• High-Amp, 3-Stage Battery Charger (adjustable)
Critical Battery Protection
• Battery Charge Conserver (Load Sense)*
• Battery Temperature Sensing*
• High-Efficiency DC-to-AC Inversion
Quiet, Simple, Maintenance-Free Operation
• Multi-Function Lights & Switches
• Automatic Generator Starting*
• Moisture-Resistant Construction
Contents
2
3
4
5-6
6-8
9
®
is a registered trademark of Tripp Lite. All rights reserved.
1111 W. 35th Street, Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
®
Surge Protection
†
10
11
12
13
13
14
Advertisement
Table of Contents
Related Manuals for Tripp Lite PowerVerter 200502023
Summary of Contents for Tripp Lite PowerVerter 200502023
-
Page 1: Table Of Contents
Your Tripp Lite Inverter/Charger provides your appliances, equipment and electronics with utility- or generator-supplied AC electricity (filtered ®... -
Page 3: Safety
Important Safety Instructions SAVE THESE INSTRUCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite Inverter/Chargers. Note: For Marine installations, please replace this page with the page titled "For Marine Applications Only" found in the Owner's Manual Addendum. -
Page 4: Feature Identification
AC power. It also enables the Inverter/Charger to be remotely monitored and controlled with an optional remote module (Tripp Lite model APSRM4, sold separately or included with select models). The “CHARGE ONLY” setting allows your batteries to return to full charge faster by turning the inverter off which halts battery discharging. -
Page 5: Operation
“AUTO/REMOTE” or “CHARGE ONLY” as desired. If unit fails to reset, remove more load or allow unit to cool further and retry. Use an optional remote control module (Tripp Lite model APSRM4, sold separately or included with select models) to reset unit due to overload and overtemperature. -
Page 6: Configuration
0% - 25% All three lights off * If all three lights remain on, an internal fault may exist. Turn off and disconnect the unit. Then, call Tripp Lite at (773) 869-1234 for assistance. Configuration Set Configuration DIP Switches Using a small tool, set the Configuration DIP Switches (located on the front panel, see diagram) to optimize Inverter/Charger operation depending on your application. - Page 7 Configuration (continued) All Models Except 612 Models Select Low AC Input Voltage Point for Switching to Battery— OPTIONAL* Switch Voltage Position 105V #A4 Up & #A3 Up #A4 Up & #A3 Down #A4 Down & #A3 Up #A4 Down & #A3 Down (factory setting) * Most of your connected appliances and equipment will perform adequately when your Inverter/Charger’s High AC Input Voltage Point (DIP Switch #2 of Group A) is set to 135V and its Low AC Voltage Input Point (DIP Switches #3 and #4 of Group A or DIP Switch #3 for 612 models) are set to 95V.
-
Page 8: Configuration
Connect Remote Control—OPTIONAL (All models) All models feature an 8-conductor telephone style receptacle on the front panel for use with an optional remote control module (Tripp Lite model APSRM, sold separately or included with select models). The remote module allows the Inverter/Charger to be mounted in a compartment or cabinet out of sight, while operated conveniently from within the living area or control panel of your RV. -
Page 9: Battery Selection
Select a battery or system of batteries that will provide your Inverter/Charger with proper DC voltage and an adequate amp-hour capacity to power your application. Even though Tripp Lite Inverter/Chargers are highly-efficient at DC-to-AC inversion, their rated output capacities are limited by the total amp-hour capacity of connected batteries and the support of your vehicle’s alternator if the engine is kept running. -
Page 10: Mounting
Inverter/Charger and connected systems. Tripp Lite manufactures a variety of different Inverter/Chargers with a variety of different mounting options for use in vehicular or non-vehicular applications. Tripp Lite recommends permanent mounting of your Inverter/Charger in any of the configurations illustrated below. User must supply mounting hardware and is responsible for determining if the hardware and mounting surface are suitable to support the weight of the Inverter/Charger. -
Page 11: Battery Connection
Battery Connection Connect your Inverter/Charger to your batteries using the following procedures: • Connect DC Wiring: Though your Inverter/Charger is a high-efficiency con- verter of electricity, rated output capacity is limited by DC Connectors the length and gauge of the cabling run- ning from the bat- tery to the unit. -
Page 12: Ac Input/Output Connection
™ OverPower Feature: Tripp Lite Inverter/Chargers deliver up to 150% of their name-plate rated wattage for up to 1 hour,* providing plenty of reserve power to reliably support tools and equipment longer. * Actual duration depends on model, battery age, battery charge level and ambient temperature. -
Page 13: Service/Maintenance
Also, check that the circuit breaker(s) are not tripped.* 2.) If the problem continues, do not contact or return the Inverter/Charger to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service tech- nician will ask for the Inverter/Charger’s model number, serial number and purchase date and will attempt to correct the problem over the... -
Page 14: Français
1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 200502023 93-2254_ES...