Removing and installing components
Recommended tools
The procedures in this document may require the following tools:
•
Phillips screwdriver #0
•
Phillips screwdriver #1
•
Torx #5 (T5) screwdriver
•
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery
Solid-state drive thermal
bracket (SSD1 slot)
Solid-state drive thermal
bracket (SSD2 slot)
8
Removing and installing components
Secured to
Screw type
Palm-rest and
Torx M2.5x4
keyboard assembly
System board and
M2x4
palm-rest and
keyboard assembly
System board and
M2x4
palm-rest and
NOTE:
keyboard assembly
screw is also one
of the seven
screws that
secures the
battery to the
palm-rest and
keyboard
assembly.
Palm-rest and
M2x4
keyboard assembly
NOTE:
screw is also one
of the seven
screws that
secures the
battery to the
palm-rest and
Quantity
8
7
1
This
1
This
2
Screw image