Activating the Auto Switch function of KVM Switch
After the second source has been set properly from
>
KVM Switch
Auto Switch
computer with keyboard and mouse control is powered off or any of the cable is disconnected,
the input source and the USB control will be switched to the other computer automatically.
The KVM Auto Switch might not switch video and USB signals simultaneously if
>
. In this case, select a video input manually from
Switch
Video Input
Scenario A-1
(If USB-C™ is disconnected)
Scenario A-2
(If USB Upstream is disconnected)
Scenario B-1
(If USB-C™ is disconnected)
Scenario B-2
(If USB Upstream is
disconnected)
and turn on the Auto Switch function. Once enabled, if the
PC 2
PC 1
PC 1
PC 1
PC 1
PC 1
>
KVM Switch
Video Input
None
>
Input
Signal Input
PC 2
PC 2
How to adjust your monitor
, you can go to
is selected from
KVM
.
PC 2
PC 2
33