BenQ AQCOLOR DesignVue PD Series User Manual page 32

Hide thumbs Also See for AQCOLOR DesignVue PD Series:
Table of Contents

Advertisement

• For
Scenario A: Working with two computers and one monitor on page
just connected. When USB Upstream under KVM Switch is selected, the display and the USB
control change from USB-C™ to the other connected video input.
• For
Scenario B: Working with two computers and two monitors on page
because two video inputs are displayed simultaneously and require no switch. The None option
will switch USB control only.
under
None
KVM Switch
page
32. If
is selected from
None
one monitor on page 32
anything from the second source as there is none. You cannot control the current display (from USB-C™) either
as the keyboard and mouse control has been switched away. In this case, select a video input manually from
>
Input
Signal Input
Scenario A: Working with two computers and one monitor
1. Establish cable connection as instructed in
2. Select
Yes
prompted to.
3. Set up the second video source as instructed in
KVM Switch before use on page
4. Go to
KVM Switch
keys is set for
Scenario B: Working with two computers and two monitors
USB-C™ cable
PC 1
1. Establish cable connection as instructed in
2. Select
Yes
prompted to.
3. Go to
KVM Switch
4. Go to
KVM Switch
keys is set for
32
How to adjust your monitor
>
is for
Video Input
KVM Switch
by accident and
USB Upstream
.
USB-C™ cable
PC 1
to enable USB-C™ power delivery in monitor standby mode if you are
and switch between
, press the custom key to switch.
KVM Switch
PC 1
to enable USB-C™ power delivery in monitor standby mode if you are
>
Video Input
and switch between
, press the custom key to switch.
KVM Switch
Scenario B: Working with two computers and two monitors on
>
for
Scenario A: Working with two computers and
Video Input
is selected for KVM Switch, the screen does not display
PC 1 / PC 2
Connect the PC video cable. on page
Setting up the second video source for
31.
and
USB-C
USB Upstream
USB cable (type A to type B)
Connect the PC video cable. on page
and select
.
None
and
USB-C
USB Upstream
32, select the video input
32, select None. This is
Video cable
PC 2
. If one of the custom
Video cable
PC 2
. If one of the custom
14.
PC 2
14.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aqcolor designvue pd2705q

Table of Contents