How To Operate Switches To Record A Tape Wlth - Toshiba V-S46 Owner's Manual

HOW TO OPERATE SWITCHES TO RECORD A TAPE
WITH "BETA hi-fi" SOUND
1. Set the "Beta hi-fi" switch to "ON" position. 3. Set the "OUTPUT" switches t o "R/LW and
2.
Set the audio "INPUT" switch t o "TV", "Beta hi-fi" positions respectively.
"LINE" or "AUDIO ONLY" as illustrated Mow, ready for recording. See "MAKING A
below. SAMPLE RECORDING and PLAYBACK" on
page
8.
Note: These switch positions should stay same for
playback of tape.
For "TV" recording For "LINE" Recording For "AUDIO" recording
OFF
flD
- .
MIX
I
LAUDIO
L
c
-
ONLY
W M f i INPUT LOUTPUTJ
OFF
LAUDIO
L
ONLY
nD
OFF
~DE
1
M I X
'Records both sound and pic- Records sound from audio Records sound only from
ture from TV. equipment and picture from audio equipment.
TV
.
(with No picture)
Note: When the sound noise will occur in play
back, adjust the tracking control of the
VCR to reduce the noise.
Notes: 1. When the "Beta hi-fi switch i s in "ON"
position, the sound is recorded on both
"Beta hi-fi" tracks and the conven-
tional horizontal monaural track.
2.
When a video camera is connected to
the "VIDEO IN" jack, it defeats the
-
signal from the tuner.
3. For playback of the "Beta hi-fi" sound
the "OUTPUT" switches should be set
-
in the "R/L" and "Beta hi-fi" positions.
4. When the "Bate hi-fi" switch
is
in
"OFF" position, set the "OUTPUT"
switch to the "R/L" position.