Table of Contents
Advertisement
1 :
: .
Note: The 14 days' period is divided into the "1st" and "2nd" weeks, and the time span of each week for
!
I
the timer memory is calculated as illustrated below:
Important Notes:
counts from the present (current) time.
I
I
I
,
TGE , W E D , THU , FRI
,
S A T , S U N , MON TUE
, W E D ,
THU
,
FRI
,
S A T , S U N , MON,
1. The "Power"
Switch must be "ON" when
programming the Timer.
2. After programming is completed, push the
"CLOCK"
button and push the "Timer"
button.
3.
I t
is
not necessary to push the "REC" button
as this is automatic in the "TIMER" Mode.
4. "ERROR" will be flashing after the "TIMER"
button is pressed in the cases when:
a) A cassette tape is not loaded into VCR.
b) The safety tab of cassette tape is removed.
5. "ERROR" will light up during program setting
in the cases when:
a) Programs overlap in time.
The first (earlier) program will be executed,
however, interrupted and switched over to the
, .
second (later) program, when the time comes.
Til l-
PM 1 1
:59
b) Both the "ON" and "OFF" are
a t
the same
time. (Program will not be executed.)
6. The "everyday" and "same day everyweek"
programs will stay memorized unless cleared by
the "CLEAR" button. {Other programs will go
off after they are executed.)
7. When the "TIMER" button is pressed for un-
attended recording, the program display will
indicate the program which is to be executed
earliest in time for about 5 seconds and then
automatically switched back to the clock dis-
play
-
From
Till
AM 12:00
(PM 11 5 9 )
2nd
week
J
I ,
1
CONFlRfVllNG THAT PROGRAMS ARE PRESET
1 . Push the "POWER" switch "ON".
Note: The displays of the "ON" and "OFF"
2. Push the "PGM" button to have
a timer dis-
timeswill alternately appear, if the "SET"
play. (Program number will be flashing.)
button
is
held pressed.
3. Push the "SET" button to move to next pro-
4. After confirming the programs, be sure to push
.
gram. (The program of the "ON" time will be
the "TIMER" button.
i
displayed.)
Note: The clock and timer display alternately
!
appear if the button i s held pressed.
i
I
I
I
TO CANCEL PREVIOUSLY TIMED PROGRAM (S)
!
I
1. Push the "POWE R" switch "ON".
4. Push the "CLEAR" button. Then the program
I '
2, Push the "PGM" button to have
a timer dis-
will be cleared.
play-
5. Repeat steps 2) through 4) for cancelling other
3.
Press the "SET" button to recall the program
program 6.
you desire to cancel.
Advertisement
Table of Contents
