Table of Contents
Advertisement
11. Press the "ENTER"
button. Then "OFF"
display will appear with "PM" and
"8"
flash-
ing, being ready for the "OFF" time setting.
-
12. Set the "OFF" time t o "PM" "9:OO" in the
CH
same manner a s in the above
6)
through 11).
Then "CH" will now be flashing.
13. Select Channel
6
by pushing
" 0 "
and "6" on.
the 10-key buttons.
14. Press the "ENTER" button. Then the "END"
I
PM
uu
will appear. Program No. 1 has now been set.
15. For program No. 2 press the "ENTER" but-
ton again. Then, "2" will be flashing, being
ready for next program.
U U
END
Notes: 1 ) If you do not wish t o set another program, press the "CLOCK" button and then the "TIMER"
button.
2)
By pressing the "TIMER" button after completing programb) as in the above Note 1
1,
your VCR
is all set for unattended timer recording.
Be sure t o read "Important Notes" on page 27.
E X A M P L E l I: Program No.
2,
Channel 24 on Wednesday next 12ndl week from
6:00
am t o
6:30
1
am.
1.
Follow the same steps 1) and 2) a s in the above
3. Follow the same steps 3) through 14)
as in the
EXAMPLE I.
above EXAMPLE I.
2. Press the "SET" button until "2nd" is flashing.
-
1
EXAMPLE I I I: Program No.
3,
Channel
8,
every day of the week from 11
:00
prn
to
1 1 : 15 pm.
1. Follow the same steps 1 ) and
2) as in the above
3. Press the "SET" button until the days of week
EXAMPLE I.
are all.flashing ("SUN MON TUE
WED
THU
2. Press the "SET" button until both "1st" and
F R I SAT").
"2nd" are flashing. Press the "ENTER" but-
4. Follow the same steps
3)
through 141 a s i n the
ton. Then "MON" will be flashing.
above EXAMPLE I.
EXAMPLE IV: Program No. 4, Channel 10, every Saturday from 7:00 pm t o
7:30
pm.
1. Follow the
same
steps 1
)
and
2)
a s in the above
3. Follow the same steps 3) through 14) as in the
EXAMPLE I.
above EXAMPLE I.
2.
Press the "SET" button until both "1st" and
"2nd" are flashing.
Advertisement
Table of Contents
