Using Acamera With The Vcr - Toshiba V-S46 Owner's Manual

USING A CAMERA WITH THE VCR
7
REMOTE PAUSE
Cam era AC Power Adaptor
1. Connect your Video Camera to the Camera
Terminals on the AC Power Adaptor.
2.
Connect the VCR Cable to the VCR Terminal
on the AC Adaptor.
3.
Connect the VCR Cable to the VCR as follows:
A. Connect the Gray Lead t o "REMOTE
PAUSE".
B. Connect the Red Lead to "AUDIO IN".
C. Connect the Black Lead to "VIDEO IN".
D. Connect the White Lead to "VIDEO OUT".
E. Connect the Yellow Lead to "AUDIO
OUT".
Note: Other Cameras may also connect to this
VCR. For proper connections, consult
your Camera Owners Manual.
4.
Set the TAPE SPEED {"LONG PLAY") switch
t o the appropriate position.
(01 I
or
01 I I)
5.
Press the VCR "P0WER"switch "0N"and set
your television set to the VCR channel (3 or
4.)
6.
-
Insert a cassette tape into the cassette compart-
ment.
7. Press the "TV/VCRW switch to the "VCR"
position.
Your television set will act as a monitor of the
picture and sound from the camera and micro-
phone. {The microphone is built into the
camera.)
8. Push the "REC" button to begin recording.
The "REMOTE PAUSE" switch on the camera
can be used to stop recording between scenes.
"TV/VCR" Switch "REC" Button
"POWER" Switch
'
\
Tape Speed
("LONG
PLAY") Switch
Notes: 1. Be sure to connect the video output
and audio output of the camera
into the "VIDEO IN" and "AUDIO
IN" of the VCR, when recording
with the camera. When connected,
the input from the tuner will be cut
off. When cannected.only into the
"VIDEO IN" the audio signals of
the tuner input will be recorded.
2. I f the volume on the TV is turned
too high, audio feedback can cause
a squeal or howl to occur.